Aller au contenu principal

Modifications apportées à l’Linksys WAP54g LED Lights Replacementintroduction

Modifié par Derek Myers

Validation en attente

Supprimé
Ajouté
Inchangé
Introduction
To see ifYou will start by isolating the router is bricked, check motherboard and then continue to see if the red power LED is on. If the network cable is plugged in make the orange link LED will be on. The green Act LED will also be off. suggested repairs by soldering.
To see ifYou will start by isolating the router is bricked, check motherboard and then continue to see if the red power LED is on. If the network cable is plugged in make the orange link LED will be on. The green Act LED will also be off. suggested repairs by soldering.
Conclusion
To reassemble your device, follow these instructions in reverse order.Once, the soldering is complete, after reassembled the device should work and the LED lights should light up.
To reassemble your device, follow these instructions in reverse order.Once, the soldering is complete, after reassembled the device should work and the LED lights should light up.