Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Luke Soules

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* icon_note] This is a diagram of the ribbon clamp connectors you will disconnect in the next step.
[* black] 1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16" or 2 mm).
[* black] 2) After disengaging the locking bar, slide the cable out of the connector.