Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Teena Carnegie

Modification approuvée par Teena Carnegie

Avant
Après
Inchangé

Lignes de l'étape

[* red] Remove rectangular rubber tops with a spudger
-[* black] Remove 2 silver screws (4.60 mm) located under rectangular rubber tops using Phillips screwdriver #1
-[* black] Remove plastic edge covering with blue plastic opening tool
-[* light_blue] Remove 2 black screws (4.63 mm) located under plastic edge covering using Phillips screwdriver #1
+[* black] Remove the two 4.60 mm PH#1 screws located under rectangular rubber tops.
+[* black] Remove plastic edge covering with the blue plastic opening tool.
+[* orange] Remove two 4.63 mm PH#1 screws located under plastic edge covering.

Image 3

Ancienne version

Nouvelle version