Modifications apportées à l'étape #10
Modifié par Elizabeth Sadewasser —
Modification approuvée par Elizabeth Sadewasser
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Remove the |
|---|---|
| - | [* orange] Disconnect the wire ribbon cables |
| - | [* yellow] Disconnect the wire connectors |
| + | [* red] Remove the two (mm) screws using a Phillips #1 screwdriver. |
| + | [* orange] Disconnect the wire ribbon cables by gently lifting up the clips with the spudger or gently lifting on the blue tabs until the clips release the ribbon cables. |
| + | [* yellow] Disconnect the wire connectors by gently prying them apart with the flat end of the spudger. This can also be accomplished by gently wiggling the connector until it comes apart. |
| [* black] Remove the motherboard. |