Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par iRobot

Modification approuvée par iRobot

Avant
Après
Inchangé

Lignes de l'étape

[title] Separating the cap and Midframe
[* black] Without removing the Jimmy tool, rotate the top (still upside down) clockwise, and the bottom counter clockwise. The two pieces will separate from each other.
-[* icon_note] Take note of the location of this tab, as seen held by the Reversed Tweezers. Mine broke off because I was too rough bending it back up, but you might need to lightly bend it up to retain the chargers ability to stay closed during transport.
+[* icon_note] Take note of the location of this tab, as seen held by the Reversed [product|IF145-020|Tweezers]. Mine broke off because I was too rough bending it back up, but you might need to lightly bend it up to retain the chargers ability to stay closed during transport.