Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par steve

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* icon_caution] The next few steps bring your hands close to the exposed face of the power supply. '''Do not''' touch the face of the power supply to avoid a high voltage shock from the many large capacitors attached to the board.
[* red] Removeblack] Remove four T10 Torx screws securing the power supply to the rear case.
[* red] Two fine-thread 7 mm T10 Torx
[* green] Two coarse-thread 7 mm T10 Torx
[* red] Removeblack] Remove four T10 Torx screws securing the power supply to the rear case.
[* red] Two fine-thread 7 mm T10 Torx
[* green] Two coarse-thread 7 mm T10 Torx

Image 1

Ancienne version

Nouvelle version