Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par David Hodson

Modification approuvée par David Hodson

Avant
Après
Inchangé

Lignes de l'étape

[* black] Lift the LCD off the front bezel enough to insert the flat end of a spudger between the metal LCD frame and the front display bezel.
[* icon_caution] Trying to insert your spudger between the LCD glass and the inner metal LCD frame will surely damage your LCD. If you gently heat the lower front panel of the clutch cover with a hairdryer, it will soften the glue on the lower front of the LCD panel making removal much easier. Use high heat and low fan speed, 30 seconds should do it.
[* icon_caution] Trying to insert your spudger between the LCD glass and the inner metal LCD frame will surely damage your LCD. If you gently heat the lower front panel of the clutch cover with a hairdryer, it will soften the glue on the lower front of the LCD panel making removal much easier. Use high heat and low fan speed, 30 seconds should do it.
[* black] Run your spudger along the lower edge of the front display bezel to separate the adhesive from the LCD frame.