Aller au contenu principal

Modifications apportées à l'étape #8

Modifié par Trev

Modification approuvée par Andrew Optimus Goldheart

Avant
Après
Inchangé

Lignes de l'étape

[* black] Pull the LCD toward the top edge of the front display bezel, minding any cables that may get caught.
[* black] If you are changing the LCD, check the replacement has the lid-closure sleep-switch activator magnet in the correct position, or transfer the magnet from the old display. The magnet is the 4mm disc near the centre-top of the LCD, held in place by clear yellow tape in this image.