Historique de l'étape n° 2 de Starbucks Barista Teardown

Modifications apportées à l'étape #2

Modifié par Andrew Bookholt — 31 juil. 2009

-	[* red] Remove the seven screws securing the chrome rear panel to the Barista (not all are shown).
+	[* red] Remove the seven Phillips screws securing the chrome rear panel to the Barista (not all are shown).
	[* black] Once the chrome panel is gone, you get a pretty comprehensive look at what makes the Barista boil. Major components include:
	[* red] A reciprocating pump.
	[* green] A boiler (with an internal heating coil).
	[* blue] A steam valve which, as you guessed it, allows steam into the steam wand (for steaming milk).
	[* violet] A bird's nest of wiring supplying power to everything.