Historique de l'étape n° 3 de Starbucks Barista Teardown

Modifications apportées à l'étape #3

Modifié par David Patierno — 16 sept. 2009

	[* black] Our first target was the pump.
-	[* icon_note] The pump is ~~resposible~~ for drawing water up from the reservoir to keep the boiler supplied with water...to boil.
+	[* icon_note] The pump is responsible for drawing water up from the reservoir to keep the boiler supplied with water... to boil.
	[* black] First, remove the two clear plastic hoses from the barb fittings on either end of the pump.
	[* icon_note] When removing hoses from barb fittings, it is helpful to use a probe (the tip of a spudger in our case) to separate the hose from the metal fitting before pulling it off.
	[* black] One hose is responsible for drawing water up from the reservoir and the other returns excess water if the boiler is filled to capacity.