Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Modifications apportées à l'étape #4

Modifié par Andrew Bookholt

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] Use a wrench to remove the boiler hose from the pump manifold.
[* red] Remove the two slotted screws securing the pump brackets to the frame of the Barista.
[* icon_note] The simple angled stiff rubber pump brackets are designed to absorb vibration from the reciprocating pump.
[* icon_note] The simple angled stiff rubber pump brackets are designed to absorb vibration from the reciprocating pump.
[* black] Disconnect the two female AC power spade connectors from the pump and slip the thermal fuse out from its holder on the body of the pump.
[* icon_note] The thermal fuse is a normally closed protective switch that opens the circuit once the pump has reached a critical temperature, thus shutting it down before the coil melts.