Modifications apportées à l'étape #4
Modifié par GM Putra —
Modification approuvée par Miroslav Djuric
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Use a wrench to remove the boiler hose from the |
|---|---|
| + | [* black] Use a wrench to remove the boiler hose from the pressure release valve. |
| [* red] Remove the two slotted screws securing the pump brackets to the frame of the Barista. | |
| [* icon_note] The simple angled rubber pump brackets are designed to absorb vibration from the reciprocating pump. | |
| [* black] Disconnect the two female AC power spade connectors from the pump and slip the thermal fuse out from its holder on the body of the pump. | |
| [* icon_note] The thermal fuse is a normally closed protective switch that opens the circuit once the pump has reached a critical temperature, thus shutting it down before the coil melts. |