Modifications apportées à l'étape #8
Modifié par Andrew Bookholt —
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Use an 8 mm bit driver to remove the four hex-head bolts from around the perimeter of the boiler (only two are shown). | |
| [* red] Remove the small hex set screw from the steam valve knob and pull it away from the piping to remove it from the barista. | |
| + | [* black] At this point, the boiler is free from the Barista and can be removed. |