Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #10

Modifié par Andrew Bookholt —

Validation en attente

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Use a flat blade screwdriver to separate the two halves of the boiler. Inside the boiler, you can see the main components:
+[* black] Use a flat blade screwdriver to separate the two halves of the boiler. Inside the boiler, you can see the main components:
[* orange] Boiler housing (to contain water and steam).
[* green] Heater coil.
[* blue] Dual thermal sensors, presumably one to maintain steam temperature and one for max temperature shut down.
[* icon_note] The bottom portion of the boiler housing has a rigid hose reaching toward the top of the boiler to collect steam for brewing the coffee.
[* black] We are having trouble finding sources for the two Klixon thermal sensors. If anyone can find a source, we would greatly appreciate it. The numbers stamped around their bases are:
[* black] 1NT01L-0036 L95-10 9910 M 10/250~T200
[* black] 1NT01L-0499 L127-15 9912 M 10/250~T200