Modifications apportées à l'étape #10
Modifié par cardogab7341 —
Modification approuvée par Miroslav Djuric
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* black] Use a flat blade screwdriver to separate the two halves of the boiler. Inside the boiler, you can see the main components: | |
| [* orange] Boiler housing (to contain water and steam). | |
| [* green] Heater coil. | |
| [* blue] Dual thermal sensors, presumably one to maintain steam temperature and one for max temperature shut down. | |
| - | [* icon_note] The bottom portion of the boiler housing has a rigid hose reaching toward the top of the boiler to |
| + | [* icon_note] The bottom portion of the boiler housing has a rigid hose reaching toward the top of the boiler to draw water from the top to keep the heater coil immersed in water. |
| [* black] There are also two Klixon thermal sensors. The numbers stamped around their bases are: | |
| [* black] 1NT01L-0036 L95-10 9910 M 10/250~T200 | |
| [* black] 1NT01L-0499 L127-15 9912 M 10/250~T200 |