Modifications apportées à l'étape #2
Modifié par Pim van der Werff —
Modification approuvée par Pim van der Werff
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Begin at the cord end of the product, as shown in the pictures. Gently pry the two halves of the external casing open with the help of a [ |
|---|---|
| + | [* black] Begin at the cord end of the product, as shown in the pictures. Gently pry the two halves of the external casing open with the help of a [product|IF145-259-1|jimmy] and push the front cap up and away from the external casing. The snap-fit should come loose. |
| [* black] After opening the first snap-fit, remove the gray cord protector by slightly pulling it backwards while keeping the gap open with your other hand. | |
| [* black] Slide the cord protector down the electrical cord and out of the way. |