Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #8

Modifié par Kati de Jong —

Modification approuvée par Kati de Jong

Avant
Après
Inchangé

Lignes de l'étape

-[* black] At the back of the product, the two halves of the case are connected with a snap-fit cap. Loosen this cap by putting a screwdriver or other [product|IF145-335-2|opening tool] under the cap and putting pressure on it.
-[* icon_note] Unfortunatley, to further acess the insides of the product, it is necessary to break the snap fit cap. It is unavoidable that this part of the product must be broken to disassemble the product.
+[* black] At the back of the product, the two halves of the case are connected with a snap-fit cap. Loosen this cap by putting a screwdriver or other [product|IF145-335-2|opening tool] under the cap using it as a lever.
+[* icon_note] Unfortunately, to further access the insides of the product, it is necessary to break the snap-fit cap. There is no way to reach this part from the back.