Aller au contenu principal

Modifications apportées à l'étape #10

Modifié par Andrew Bookholt

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Disconnect the right fan by pulling its connector away from the socket on the logic board.
[* icon_note] When pulling this connector away from its socket, it is helpful to use your fingernails to pull on the ears at each side of the connector.
[* icon_caution]
Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.
[* icon_note] When pulling this connector away from its socket, it is helpful to use your fingernails to pull on the ears at each side of the connector.
[* icon_caution]
Be sure to pull only parallel to the face of the logic board, as pulling up on the socket will break it off the logic board.