Modifications apportées à l'étape #1
Modifié par charles vanderlick —
Modification approuvée par charles vanderlick
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* red] Start by placing the laptop upside down to expose the first set of screws on the bottom of the laptop. Use your J1 Phillips head screwdriver bit to unscrew the 8 size |
|---|---|
| + | [* red] Start by placing the laptop upside down to expose the first set of screws on the bottom of the laptop. Use your J1 Phillips head screwdriver bit to unscrew the 8 size 6 mm screws. |
| [* orange] Remove the plastic cover to unveil the final screw holding the front and back frame together. | |
| - | [* yellow] Remove this last screw of size |
| + | [* yellow] Remove this last screw of size 6mm with the J1 phillips head bit found in the approved iFixit toolkit. |