Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Sam Goldheart

Modification approuvée par Sam Goldheart

Avant
Après
Inchangé

Lignes de l'étape

-[* black] HTC broke things up into two boards this time around—instead of one big motherboard, we get one dedicated to the audio/video hardware and a second for the sensors/cameras
-[* black] Thick slab of copper shielding over the cameras, because why?
-[* black] We peel away all that copper to get a good look at the cameras.
+[* black] First item on the menu: the dual microphone cable near the bottom of the face plate.
+[* black] Moving right along we snag the faceplate-mounted mainboard, saving the secondary I/O board for later
+[* black] Peeling that board up we find a hefty copper plate, likely used to keep things cool. Passive cooling will be the way to go, to keep this device light enough to wear on your face!
+[* black] And under ''that'' we find the cameras! Two separate units with no identifiable markings.