Modifications apportées à l'étape #13
Modifié par Adam O'Camb —
Modification approuvée par Adam O'Camb
- Avant
- Après
- Inchangé
Lignes de l'étape
| - | [* black] Twist an opening pick between the display and the display frame to pry apart the display and the frame. |
|---|---|
| - | [* icon_caution] If any part of the display stays stuck, apply more heat and try to cut any remaining adhesive in that area. |
| - | [* black] Do not remove the display at this point. The display cable is still threaded through the display frame. |
| + | [* black] Insert an opening pick in between the display and the display frame on the battery side. |
| + | [* black] Twist the pick to pry apart the display and the frame. |
| + | [* icon_note] If any part of the display stays stuck, apply more heat and try to cut any remaining adhesive in that area. |
| + | [* icon_caution] Do not remove the display at this point. The display cable is still threaded through the display frame. |