Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Taylor Dixon

Modification approuvée par Taylor Dixon

Avant
Après
Inchangé

Lignes de l'étape

[* red] Remove the nine 12mm Phillips #1 screws around the perimeter of the case with a screwdriver.
[* orange] Remove the two 15mm Phillips #1 screws connecting the body panel to the neck panel with a screwdriver.
+[* icon_note] These screws can also be Torx on some models.
[* black] Pull off the rear case.
-[* violet] The screws can also be Torx on some models.