Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #10

Modifié par Kush Upadhyay

Modification approuvée par Kush Upadhyay

Avant
Après
Inchangé

Lignes de l'étape

[* black] Reorient the brewer as shown in the picture.
[*
black] Locate the four 140mm screws holding the top frame of the Keurig in place. Remove these screws using the screwdriverJ1 head.
[* red] Two of thesethe screws are on the inside of the frame close to the water heater.
[* icon_note] You may need to decrease the size of the screwdriver in order for it to fit inside the frame to unscrew these screwsframe. Do this by taking out the bit extender.
[* blackorange] The other two screws are located on the outside of the frame.
[* black] Reorient the brewer as shown in the picture.
[*
black] Locate the four 140mm screws holding the top frame of the Keurig in place. Remove these screws using the screwdriverJ1 head.
[* red] Two of thesethe screws are on the inside of the frame close to the water heater.
[* icon_note] You may need to decrease the size of the screwdriver in order for it to fit inside the frame to unscrew these screwsframe. Do this by taking out the bit extender.
[* blackorange] The other two screws are located on the outside of the frame.

Image 3

Ancienne version

Nouvelle version