Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #10

Modifié par Alec Jamosmos

Modification approuvée par Alec Jamosmos

Avant
Après
Inchangé

Lignes de l'étape

[* black] Locate the four 140mm screws holding the top frame of the Keurig in place. Remove these screws using the screwdriver.
[* black] Two of these screws are
on the inside of the frame close to the water heater. Remove
[* black] You may need to decrease the size of the screwdriver in order for it to fit inside the frame to unscrew
these screws. Do this by taking out the bit extender.
[* black] The other two
screws usingare located on the screwdriver.
[* black] Locate the four 140mm screws holding the top frame of the Keurig in place. Remove these screws using the screwdriver.
[* black] Two of these screws are
on the inside of the frame close to the water heater. Remove
[* black] You may need to decrease the size of the screwdriver in order for it to fit inside the frame to unscrew
these screws. Do this by taking out the bit extender.
[* black] The other two
screws usingare located on the screwdriver.