Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #10

Modifié par Justin Ogihara

Modification approuvée par Justin Ogihara

Avant
Après
Inchangé

Lignes de l'étape

[* black] Reorient the brewer as shown in the picture.
[* black] Locate the four 140mm screws holding the top frame of the Keurig in place. Remove these screws using the J1 headPhillips #1 screwdriver.
[* black] Locate the four 140mm screws holding the top frame of the Keurig in place. Remove these screws using the J1 headPhillips #1 screwdriver.
[* red] Two of the screws are on the inside of the frame close to the water heater.
[* icon_note] You may need to decrease the size of the screwdriver in order for it to fit inside the frame. Do this by taking out the bit extender.
[* orange] The other two screws are located on the outside of the frame.