Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Lonnie Bissmeyer

Modification approuvée par Lonnie Bissmeyer

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Move the ribbons out of the way and remove the eight screws10mms crews in the middle that hold the circuit board down.
[* orange] Remove the two 12mm screws in the corner of the circuit board.
[* red] Move the ribbons out of the way and remove the eight screws10mms crews in the middle that hold the circuit board down.
[* orange] Remove the two 12mm screws in the corner of the circuit board.