Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Paul Ringelstein

Modification approuvée par Paul Ringelstein

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Bend the wire around the contact point. Pin numbers are located on the outside of the connector.
[* black] Connect the red wire to Pin 3 and the blue wire to Pin 2.
[* black] Pin 1 should have a single piece of exposed wire connecting it to the metal plate on the top of the connector (the ground plate).
[* red] The red circle shows the red wire connected to Pin 3.
[* blue] The blue circle shows the blue wire connected to Pin 2.

Image 1

Ancienne version

Nouvelle version