Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Paul Ringelstein

Modification approuvée par Paul Ringelstein

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Bend the wire around the contact point. Pin numbers are located on the outside of the connector.
[* black]
Connect the red wire to Pin 3 and the blue wire to Pin 2.
[* black]
Pin 1 should have a single piece of un-insulatedexposed wire connecting it to the metal plate on the top of the connector (the ground plate).
[* black] Bend the wire around the contact point. Pin numbers are located on the outside of the connector.
[* black]
Connect the red wire to Pin 3 and the blue wire to Pin 2.
[* black]
Pin 1 should have a single piece of un-insulatedexposed wire connecting it to the metal plate on the top of the connector (the ground plate).