Modifications apportées à l'étape #4
Modifié par Paul Ringelstein —
Modification approuvée par Paul Ringelstein
- Avant
- Après
- Inchangé
Lignes de l'étape
[* black] First, remove the solder and then the soldering iron from the contact point. [* icon_caution] If you remove the soldering iron first, the solder may become stuck to the contact point. [* black] Let the wire cool for 30 seconds or so. |
[* black] First, remove the solder and then the soldering iron from the contact point. [* icon_caution] If you remove the soldering iron first, the solder may become stuck to the contact point. [* black] Let the wire cool for 30 seconds or so. |
[* black] If the wire is not completely connected repeat steps 2 through 5. |