Réparez vos affaires Communauté Boutique

Modifications apportées à l'étape #19

Modifié par Evan —

Modification approuvée par Evan

Avant
Après
Inchangé

Lignes de l'étape

[title] Optional: Install CCD
[* black] IF your replacement lens assembly does not have a CCD (sensor):
-[* black] Carefully scrape 5? glue dots from edges of CCD on old lens assembly.
-[* black] Remove 3? screws securing CCD to back of lens assembly.
+[* black] Carefully scrape 5 glue dots from edges of CCD on old lens assembly.
+[* black] Remove 3 screws securing CCD to back of lens assembly.
[* black] Remove CCD, noting any tiny brass washers/spacers that may be present where screws were.
-[* black] Remove rubber infrared filter gasket and infrared filter (small rectangle of bluish glass) from back of old lens assembly).
-[* black] Install infrared filter, filter gasket, and CCD on back of new lens assembly.
+[* black] Remove rubber infrared filter gasket and infrared filter (small rectangle of bluish glass) from back of old lens assembly) & install on back of new lens assembly.
+[* black] Note: S100 & S110 CCDs are not interchangeable - ribbon connector for the S100 lens assembly is larger, & does not fit on the S110 board connector.