Aller au contenu principal

Modifications apportées à l'étape #7

Modifié par Skylar

Modification approuvée par Skylar

Avant
Après
Inchangé

Lignes de l'étape

[title] Bottom Half (continued)
[* black] Time for a bit change! The PCB housing the switches for left and right clicks comes off with four P0 screws and another ZIF connector.
[* black] The scroll wheel assembly is held in with two P0 screws at the front. There's also a connector for the motor hiding under the ribbon cable for the PCB you just removed.
[* black] These screws aren't visible in this step, but can be seen in the previous one. I'm terrible at taking pictures.
[* black] You can see some of the debris causing my scrolling issues in the last photo.

Image 1

Aucune image précédente

Ajouté

Image 2

Aucune image précédente

Ajouté

Image 3

Aucune image précédente

Ajouté