Aller au contenu principal

Réparez vos affaires

Droit à la réparation


Modifications apportées à l'étape #1

Modifié par Philip Le Riche

Modification approuvée par Philip Le Riche


Lignes de l'étape

[* red] Remove 6 screws in the handle.
[* black] Using a jimmy, thin spatual or other prying too, separate the two halves of the handle.
[* orange] As you separate the two halves, try not to let the trigger spring take flight. On reassembly, make sure the two pegs on the trigger are fitted into their slots and the spring is in place.
[* yellow] As you separate the halves of the handle, the lamp assembly may stay with the upper half you are removing. Transfer it to the lower half for reassembly. Ensure all parts are fitted snugly in their proper positions and that wires are tucked away so as not to be pinched when the handle is closed.
[* black] If you need to, you can now lift out the circuit board for inspection, or lift out the battery for testing or replacement.

Image 1

Aucune image précédente


Image 2

Aucune image précédente