Aller au contenu principal

Modifications apportées à l'étape #4

Modifié par Andrew Bookholt

Validation en attente


Lignes de l'étape

-[* black] Insert wisdom here.
+[* icon_note] Re-orient your iMac so it sits upright on the stand.
+[* black] Insert a plastic card up into the corner of the air vent slot near the top of the rear case.
+[* black] Push the card toward the top of the iMac to release the front bezel latch.
+[* black] Pull the front bezel away from the rear case.
+[* icon_note] Repeat this process for the other side of the front bezel.
+[* icon_note] It may be necessary to apply several layers of duct tape to the top of the access card to aid in releasing the latches.
+[* black] If the bezel refuses to release, try pressing the lower edge back onto the rear case and repeat this opening process.

Image 3

Aucune image précédente