Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Rodrigo Elizondo

Modification approuvée par Rodrigo Elizondo

Avant
Après
Inchangé

Lignes de l'étape

[* red] Using the Philips #1 screwdriver remove the (4) 4.0mm corner screws securing the Hard Drive assembly to the body.
- [* black] Disconnect the hard drive from the back panel by sliding it to the left until loosened.
+ [* orange] Disconnect the hard drive from the back panel by sliding it to the left until loosened.
[* black] Remove it completely by lifting the hard drive out of the back panel.

Image 2

Aucune image précédente

Ajouté