Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Marty Rippens

Modification approuvée par Marty Rippens

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Using the Philips #1 screwdriver remove the (4) 4.0mm corner screws securing the Hard Drive assembly to the body.
+[* red] Using a Phillips #1 screwdriver, remove the four 4.0mm corner screws securing the hard drive assembly to the body.
[* orange] Disconnect the hard drive from the back panel by sliding it to the left until loosened.
[* black] Remove it completely by lifting the hard drive out of the back panel.