Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Daniel Handojo

Modification rejetée par Sam Omiotek

Avant
Après
Inchangé

Lignes de l'étape

-[* red] Using a Phillips #1 screwdriver, remove the four 4.0mm corner screws securing the hard drive assembly to the body.
+[* red] Using a Phillips #0 screwdriver, remove the four 4.0mm corner screws securing the hard drive assembly to the body.
[* orange] Disconnect the hard drive from the back panel by sliding it to the left until loosened.
[* black] Remove it completely by lifting the hard drive out of the back panel.