Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Andrew Fleming

Modification approuvée par Andrew Fleming


Lignes de l'étape

[* red] Remove eighteen 10.19 mm Phillips #1 screws from the perimeter of the back panel by turning the screwdriver counterclockwise.
[* icon_note] Two of the screws along the perimeter are underneath the hinged panels in the bottom corners as shown in the third picture.
[* orange] Remove one 11.91 mm Phillips #1 screw from the center of the back panel.
[* yellow] Remove two 10.19mm Phillips #1 screws from underneath hinged panels in the bottom right and left corners.
[* icon_note] Our device does not include the cover panels for the USB, DVI-D, and power ports. You must first remove these cover panels shown in yellow in order to remove the back panel.

Image 1

Ancienne version

Nouvelle version