Modifications apportées à l'étape #5
Modifié par Helen Montell-Weiland —
Modification approuvée par Helen Montell-Weiland
- Avant
- Après
- Inchangé
Lignes de l'étape
| [* red] Remove the seventeen 8mm Phillips #2 screws with flanges from the horizontal side of the plate by turning the screwdriver counterclockwise. |
| [* red] Remove the seventeen 8mm Phillips #2 screws with flanges from the horizontal side of the plate by turning the screwdriver counterclockwise. |
| [* orange] Remove the ten 8mm Phillips #2 screws with flanges from the vertical sides of the plate by turning the screwdriver counterclockwise. |
| [* black] Remove the back metal plate by lifting up along one edge then lifting the plate off and away from the device. |
Image 3
Supprimé