Aller au contenu principal

Modifications apportées à l'étape #5

Modifié par Andrew Bookholt

Validation en attente

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[* black] Insert wisdom hereicon_note] To avoid the screws falling behind the logic board, lay your iMac stand-side down on a table.
[* red] Remove the two T10 Torx screws from the lower edge of the optical drive
.
[* black] Insert wisdom hereicon_note] To avoid the screws falling behind the logic board, lay your iMac stand-side down on a table.
[* red] Remove the two T10 Torx screws from the lower edge of the optical drive
.

Image 1

Ancienne version

Nouvelle version