Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Madeline David

Modification approuvée par Madeline David

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] Unplug the power button connector by pinching the tab on the front and pulling directly upwards.
[* black] Pull the cable through the center section of the hoverboard.
[* icon_reminder] For reassembly, you will have to feed the cable back through the center section. This can be done using a ridgedrigid wire or cable.
[* icon_reminder] For reassembly, you will have to feed the cable back through the center section. This can be done using a ridgedrigid wire or cable.