Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Robert Ohling

Modification approuvée par Robert Ohling

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] With the keyboard removed, you will see a 1.5 x 7mm, PH00 screw at the bottom right of the keyboard housing. This screw locks into place the slide seen to the left.
[* black] Unscrew this screw fully, and set it on the side. Note that this is the only 1.5x7 mm screw in the entire laptop, so it is very important to keep track of it.
[* black] Now placePlace a screwdriver or other firm tool with a fine tip inside the hole at the other end of the slide. Pushing this to the left to unlock the slide will take a good bit of force as it unlocks a series of clips underneath the trackpad plate. Make sure the slide is fully to the left in the "unlocked" position.
[* black] Now placePlace a screwdriver or other firm tool with a fine tip inside the hole at the other end of the slide. Pushing this to the left to unlock the slide will take a good bit of force as it unlocks a series of clips underneath the trackpad plate. Make sure the slide is fully to the left in the "unlocked" position.