Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #4

Modifié par Ron Davis

Modification approuvée par Ron Davis

Avant
Après
Inchangé

Lignes de l'étape

[* icon_caution] When disconnecting any wire connection do notblack] Holding them by their white plastic coverings, firmly pull by wiresthe two wires from the power switch.
[* icon_caution] Be sure to grip the wires from their attached connectors
. Pulling directly on the wires could damage your vacuum.
[* black] Remove the power terminals from the switch by strongly pulling them away from the switch while gripping the white, plastic covering.

[* icon_reminder] The terminals will only fit one way when reassembling, i.e., onlyduring reassembly. Only one of the terminal wires is long enough to reach the far terminal of the switch.
[* icon_caution] When disconnecting any wire connection do notblack] Holding them by their white plastic coverings, firmly pull by wiresthe two wires from the power switch.
[* icon_caution] Be sure to grip the wires from their attached connectors
. Pulling directly on the wires could damage your vacuum.
[* black] Remove the power terminals from the switch by strongly pulling them away from the switch while gripping the white, plastic covering.

[* icon_reminder] The terminals will only fit one way when reassembling, i.e., onlyduring reassembly. Only one of the terminal wires is long enough to reach the far terminal of the switch.