Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #7

Modifié par Wendy Zaballos

Modification approuvée par Wendy Zaballos

Avant
Après
Inchangé

Lignes de l'étape

[* red] Remove the two screws underneath the GPS connector
[* orange] Desolder the GPS connector
[* icon_note] The GPS antenna is a thru-hole-mounted device. You must apply heat to each soldered pin individually and pull them out of the holes while the solder is molten.
[* icon_caution] The solder material, pins, and any surrounding material will get VERY hot while melting the connections. Do not touch any metal parts during the desoldering process and give the device time to cool off once you’re finished. It may also be good to take breaks so that the electronics aren’t kept hot for extended periods of time.