Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Modifications apportées à l'étape #1

Modifié par Matt Bav

Modification approuvée par Matt Bav

Avant
Après
Inchangé

Lignes de l'étape

[* black] Use your screwdriver to remove the four screws as shownred] Remove two 14 mm Phillips #2 screws.
[* orange] Remove two 12 mm Phillips #2 screws
.
[* black] Lift the arm off the assembly. (Matt: this step and the next could be combined)
[* black] Use your screwdriver to remove the four screws as shownred] Remove two 14 mm Phillips #2 screws.
[* orange] Remove two 12 mm Phillips #2 screws
.
[* black] Lift the arm off the assembly. (Matt: this step and the next could be combined)
[* black] This will reveal the tank hole as shown.
[* icon_caution] It is recommended that you clog the tank hole with a napkin or something similar in order to prevent small parts from falling ininto the heating element.
[* icon_caution] It is recommended that you clog the tank hole with a napkin or something similar in order to prevent small parts from falling ininto the heating element.

Image 1

Ancienne version

Nouvelle version