Modifications apportées à l'étape #1

Modifié par Samantha Wright

Modification approuvée par Samantha Wright

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* black] Use flathead screwdriver tool to remove the three 2.5 mm screws shown in the photo. Two screws are located at the base of the motherboard and there is one screw located at the top.
[* black] Use flathead screwdriver tool to remove the three 2.5 mm screws shown in the photo. Two screws are located at the base of the motherboard and there is one screw located at the top.
[* black] Carefully place removed screws on the magnetic project map.