Aller au contenu principal

Modifications apportées à l'étape #3

Modifié par Paul Barnfather

Modification approuvée par Paul Barnfather

Supprimé
Ajouté
Inchangé

Lignes de l'étape

[title] Remove the 6V componentsparts
[title] Remove the 6V componentsparts
[* black] Disconnect and remove the 6V battery
[* black] Disconnecticon_note] The 12V system is quite a bit simpler than the three wires fromWipac system, as there's no longer a need to switch the alternator
[* black] Remove
output with the resistance wire fromheadlight. It's probably easier to refer to the differences in the wiring loomdiagram pictures to see what needs to be removed...
[* black] Disconnecticon_note] The 12V system is quite a bit simpler than the three wires fromWipac system, as there's no longer a need to switch the alternator
[* black] Remove
output with the resistance wire fromheadlight. It's probably easier to refer to the differences in the wiring loomdiagram pictures to see what needs to be removed...
[* black] Disconnect and remove the rectifier, noting the brown wire that connects to the rectifier negative terminal (you'll be connecting to this wire later...)
[* black] DisconnectRemove the orange, light green and removewhite wires as well as the resistance wire from the main loom
[* black] Remove
the 6V ignition coil
[* black] DisconnectRemove the orange, light green and removewhite wires as well as the resistance wire from the main loom
[* black] Remove
the 6V ignition coil
[* black] Remove the headlamp bulb, sidelight bulb, stop/tail bulb (and any other 6V bulbs)

Image 2

Aucune image précédente

Ajouté