Aller au contenu principal

Modifications apportées à l'étape #1

Modifié par Luke Soules

Validation en attente

Supprimé(e)
Ajouté(e)
Inchangé

Lignes de l'étape

[* red] RemoveUse a 1.5mm hex screwdriver to remove the two hex-headhex screws from the left and right edgeson either side of the display (four screws total).
[* icon_note] AIf you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver works just fine for removing thesescrewdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.
[* red] RemoveUse a 1.5mm hex screwdriver to remove the two hex-headhex screws from the left and right edgeson either side of the display (four screws total).
[* icon_note] AIf you don't have a 1.5mm hex driver, you can probably get these screws out with a T6 Torx screwdriver works just fine for removing thesescrewdriver. However, if you use a T6 Torx driver you'll be more likely to strip the screws.