Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Taylor Dixon

Modification approuvée par Taylor Dixon

Avant
Après
Inchangé

Lignes de l'étape

[* icon_note] The following four steps show how to pry the rear case from the plastic frame.
-[* red] Strong clips hold the frame against the rear case.
-[* icon_caution] Note the two different seams around the perimeter of the phone:
- [* orange] Display panel seam. ***Do not pry*** at this seam, or you will separate and damage the display panel.
- [* yellow] Frame seam. This seam lies underneath the plastic frame. ***Pry at this layer only***.
+[* icon_caution] There are two different seams between the body and the screen of the phone:
+ [* orange] ''Display panel seam'': This seam is part of the display assembly. ***Do not pry*** at this seam, or you will separate and damage the display panel.
+ [* yellow] ''Frame seam'': This is where the display panel meets the back cover. ***Only pry at this seam***.
+[* red] There are twelve clips that hold the frame against the rear case. Be aware of their location as you pry the back cover off in the following steps.

Image 1

Ancienne version

Nouvelle version

Image 2

Ancienne version

Nouvelle version

Image 3

Ancienne version

Nouvelle version