Aller au contenu principal

Modifications apportées à l'étape #2

Modifié par Arthur Shi

Modification approuvée par Arthur Shi

Avant
Après
Inchangé

Lignes de l'étape

-[* icon_note] The following four steps show how to pry the rear case from the plastic frame.
+[* icon_note] The following four steps show how to pry the rear case from the plastic frame. Read through the steps first before attempting the procedure.
[* icon_caution] There are two different seams between the body and the screen of the phone:
- [* orange] ''Display panel seam'': This seam is part of the display assembly. ***Do not pry*** at this seam, or you will separate and damage the display panel.
- [* yellow] ''Frame seam'': This is where the display panel meets the back cover. ***Only pry at this seam***.
-[* red] There are twelve clips that hold the frame against the rear case. Be aware of their location as you pry the back cover off in the following steps.
+ [* red] ''Display panel seam'': This seam is part of the display assembly. ***Do not pry*** at this seam, or you will separate and damage the display panel.
+ [* orange] ''Frame seam'': This is where the plastic frame meets the back cover. ***Only pry at this seam***.
+[* yellow] There are twelve clips that hold the frame against the rear case. Be aware of their location as you pry the back cover off in the following steps.

Image 1

Ancienne version

Nouvelle version

Image 3

Ancienne version

Nouvelle version