Aller au contenu principal

Réparez vos affaires

Droit à la réparation


Modifications apportées à l'étape #1

Modifié par substevew

Validation en attente


Lignes de l'étape

[* red] Remove the Phillips screws from the lower left and right corners of the display (two screws total).
[* black] The screw fixing points on my MBP came away from the back case. (at this point I could hear them ratel about inside the casing DON'T PAINIC) They are spot welded to the back case and in the Photo's I have you can see the point's each. You may think that if this happens you lose the ability to use the screws to secure the enclosure but you still can use the screws if you position the fixing points before clipping the front panel in place. Have a needle of small nail to align though the holes before replacing the screws. This is not easy and you need to be practices at this sort of repair.
[* black] The 3rd photo show the fixing point's after the case has been dissembled.

Image 3

Aucune image précédente